Tag Archives: lekku

So.. it’s happening. Finally some good progress on my Lekku of Dooooooom!

Check ‘em out! They reach my knees! Some of the super curve I had in early stages fell out, but I know what I did and I don’t think I could have avoided it under current circumstances.

Also photo of my latest purchase! the perfect packable sized containers from the local Daisco (or $3.50 japan shops in Auckland- super excited one opened local to me XD). These are pill containers and I have filled the larger panel with the main body colour for (left to right) Rachi, Liara and Talon/Shaak Ti. The smaller panels I am filling with highlights, liners and colours for patches/markings.

So for Rachi I have (clockwise from top right) pink, white, dark purple and then the final panel will have black for line work.

For Liara (ditto) I have white then will mix similar shading and line work colours (dark blue and black).

For Talon/Shakk Ti I will have two for white and two for black as both require a fair amount of one or the other.

Then I can pack my small carry kit (seen in an earlier post, check the tags (make up) with all the brushes and shading powders in there along with mascara and regular make up..

As a balance of cost type of comparison, you need two NZ Airbrush Tattoos bottle to make about the same as one RC large colour pot. So if you are on a budget you can buy the local stuff and slowly build it up if you are not mixing colours. If you want to head straight into the colour pots then expect to pay about 2/3 extra for shipping. At least if you are buying say 4-6 pots.

Other Talon updates: The strapping has been fixed 🙂 I need to trim some extra bits but the greaves and bracers now have black velcro (don’t ask how I wound up with white as I don’t even know…) and the fixed strapping has been glued down.
I have cleaned the bikini and will need to take in the leggings and gloves. I left the top edge raw as the fabric is scuba stuff so it hard to hem, I am hoping like heck the bikini bottoms still fit as the legs have been hemmed and I don’t fancy unpicking so I can take them in.
The belt still needs to be taken in and I hope I have enough rivets to do so! I may not. I have the snaps but the leather is thick. I am pretty sure I had issues trying to get them to work last time.
Tattoos are being redrawn! I hope to get the line work able to fit fewer pages but if not, I’ll have to use two types of paper. I am flitting between files and artwork and think redrawing them is going to work out the best as I can then use unsharp mask to make sure the edges look hand painted. And the files I made last time were slightly oversized.

So.. it’s happening. Finally some good progress on my Lekku of Dooooooom!

Check ‘em out! They reach my knees! Some of the super curve I had in early stages fell out, but I know what I did and I don’t think I could have avoided it under current circumstances.

Also photo of my latest purchase! the perfect packable sized containers from the local Daisco (or $3.50 japan shops in Auckland- super excited one opened local to me XD). These are pill containers and I have filled the larger panel with the main body colour for (left to right) Rachi, Liara and Talon/Shaak Ti. The smaller panels I am filling with highlights, liners and colours for patches/markings. 

So for Rachi I have (clockwise from top right) pink, white, dark purple and then the final panel will have black for line work.

For Liara (ditto) I have white then will mix similar shading and line work colours (dark blue and black).

For Talon/Shakk Ti I will have two for white and two for black as both require a fair amount of one or the other.

Then I can pack my small carry kit (seen in an earlier post, check the tags (make up) with all the brushes and shading powders in there along with mascara and regular make up..

As a balance of cost type of comparison, you need two NZ Airbrush Tattoos bottle to make about the same as one RC large colour pot. So if you are on a budget you can buy the local stuff and slowly build it up if you are not mixing colours. If you want to head straight into the colour pots then expect to pay about 2/3 extra for shipping. At least if you are buying say 4-6 pots.

Other Talon updates: The strapping has been fixed 🙂 I need to trim some extra bits but the greaves and bracers now have black velcro (don’t ask how I wound up with white as I don’t even know…) and the fixed strapping has been glued down. 
I have cleaned the bikini and will need to take in the leggings and gloves. I left the top edge raw as the fabric is scuba stuff so it hard to hem, I am hoping like heck the bikini bottoms still fit as the legs have been hemmed and I don’t fancy unpicking so I can take them in.
The belt still needs to be taken in and I hope I have enough rivets to do so! I may not. I have the snaps but the leather is thick. I am pretty sure I had issues trying to get them to work last time. 
Tattoos are being redrawn! I hope to get the line work able to fit fewer pages but if not, I’ll have to use two types of paper. I am flitting between files and artwork and think redrawing them is going to work out the best as I can then use unsharp mask to make sure the edges look hand painted. And the files I made last time were slightly oversized.