Definitely leather :)

So I got to work on the torso armour. I cannot undo having seen the shapes of the original papercraft and it really did help hugely. I mostly though used the collars as they were so I didn’t over complicate the shape by trying for a perfect fit- don’t ask me about Nyreen’s simple collar and how that got drafted…:

sm_DSC_2175 sm_DSC_2176 sm_DSC_2177

So as per above I taped lunch paper around my mannequin and taped the collars to it to create a base to stick the collars to, it will also form the “straps”. I then cut the paper in to two parts (left and right, front and back combined) to create a solid base to stick the chest plates and all the back componants to. In doing this I wound up finalising my decision to use leather to make the armour from. The collars self support and so long as I take care when storing I won’t have to worry about any warping. Also with this front opening underlayer I have worked out the method of getting in and out of this. The chest piece acts as a plastron.

sm_DSC_2174

So the chest pieces were roughly copied from the paper and trimmed to shape on the form. I adapted the base pattern quite heavily to eliminate excess cuts and straight edges. This is a bit like using a T-shirt as a guide to fit a bodysuit. You get a good head start to have a nice standard shape.

sm_DSC_2182 sm_DSC_2180 sm_DSC_2181

I am Faora! Ehem… yeah I may be using this pattern as a spring board for other armour…. Oh and yes the base still needs cutting away under the arms and to the swoop back pieces but this was to make sure it actually fit.

I made a thing, food this time ;)

So I originally made a weird totmato and pepper soup/sauce that was too rich:

Tomato and Roasted Pepper Base:
1 jar roasted peppers lightly crushed and dry fried (they were in a water and oil mix)
2 cans pureed tomatoes and 2 cans water
pinch or paprika

It was too rich and too sweet and way out of balance.

I tied a tiny amount with a tiny amount of cream and mmmmm, way too rich but the idea of using it as a base for veges started to evolve.

So yesterday I added
3 leeks finely sliced and dry fried (reabsorbing their own moisture)
The last of the base (about 2 cups)
and about 75ml cream.

So amazing but it felt too rich still.

So today I bought half a head of cauliflower, half steamed half boiled (so lid on but only a little water). Strained and bashed (masher doesn’t work so it was just to break up the pieces).
And a little water and the leek mix and a sprinkle of salt and flour to bind.

And yes. Super yummy. Also smoked paprika which I added to the leeks and cauliflower stages is super yummy.

Hmm again mind is changing…

So I was thinking about how much less card it took to make the thigh pieces as I thought. Also how the card behaves let alone anything rigid and i’m almost at the make it from leather stage again.

I want this to be functional and wearable so I can do some action shots. And the tensions of the belt, and thigh strapping is not fully adjusted for even with the layers being hinged. That just allows for sideways motion.

So I may have to rescue some heavier leather I have in water and use that for the collars and get some edge sealer as well.

Please excuse me while I nom on leblebi.

Heat n Bond funtimes 🙂

My camera on my phone is being special…. But here is the remaining trim all bonded and ready to…

View Post

Definitely leather 🙂

So I got to work on the torso armour. I cannot undo having seen the shapes of the original…

View Post

I made a thing, food this time ;)

So I originally made a weird totmato and pepper soup/sauce that was too rich:

Tomato and Roasted Pepper Base:
1 jar roasted peppers lightly crushed and dry fried (they were in a water and oil mix)
2 cans pureed tomatoes and 2 cans water
pinch or paprika

I…

View Post

Hmm again mind is changing…

So I was thinking about how much less card it took to make the thigh pieces as I thought. Also how the card behaves let alone anything rigid and i’m almost at the make it from leather stage again.

I want this to be functional and wearable so I can do…

View Post

And hippy dippy

image image

So that took too long but I have butt cup thing and hip, belt, thigh pieces. Stage 1 again but I have run out of card. Also cut the original papercraft chest pieces apart and I think I will just use them with the new cutting lines as well as create a new shoulder and back support.
So most of it will be my pattern (direct to mannequin) but the chest will be an alteration of the papercraft. Unless I go and buy even more card and just do this out of stubborness…. Which is fairly typical.
I need more card anyway….

Clashing cardboard aside….

image image

So this is what I mean by stage 1. Here all the layers are present but I still rely on tape to help with the shape. So there are still patches and darts that need to be cut and evened. But I have tried this on my arm and it fits with enough wiggle room for a thicker substrate- probably two layers of thin foam not the heavy stuff.
So I need a good amount of extra card to do this. Also I think I’d actually need at least one whole extra cow were I to make this from leather so I will leave it for my current plans of Talon bikini top and some fantasy armour.

Some drawing and stickifying

Got my references (Nyreen and Blood Dragon) images pinned to the wall, so I don’t have to keep using my netbooks trackpad, I am not a fan of them anyway 😉 and started transfering more pattern pieces to card. Well this will be a two or three step process as the first pass at card brings out any fine discrepencies in shapes. So I have stage one knee, shoulder, bicep, elbow and bracer and stage two calf.
A break to rest my face (yay, CT scan can’t come soon enough) and get some calories (I can chew again- gently!) so I can transfer the stage 1 patterns today if I am not shaking too much.
I would love to have this armour finished for Armageddon, but given the pace I am doubtful. I won’t have a miracle cure for my fatigue, sinusitis/infection or RA and may in fact be worse in all areas depending on what treatments are advised/taken up.

Anyway. I also have to decide what to do with a lovely length of the trim used for the apron drapery of the Elissa gown. I have enough for the hem of the overskirt, and then about 2/3 of the train. So that’s a no to the train. Unless I decide no to the skirt… it may tie the back more closely to the front that way… yeah. That might be the better option. Now to decide just how that works with the layers of red and green and having to add trim to the other side.