Maleficent progress :)

Maleficent progress 🙂

Firstly going back to the preshow last minute stuff!

 

Horns: cut to shape then glued in place. You can see the dip on the horn on the right hand side. I do still like this effect but having seen the movie now I don’t need to go mad trying to do this again! they are much more opaque and with a less defined series of growth rings, so yay 🙂

Yes, I like my shadow in these things!

With the layer of black resin straight over! Also more fibreglass on the crown. This made it more rigid and actually in hind sight it wasn’t needed.

Sculptures and casts for the soft parts on the costume. I can’t believe I did that all in one evening!

And the staff. This may be why my ring finger was so bad…. that’s hand modeled epoxy 🙂 With microballons it’s a beautiful putty but epoxy is not my friend!

oh hey and that paint was just acrylic ink and paint mixed with IA and brushed on with a chipping brush. It was not fully cured. But handy hint: ochre and yellow ink, with a smidge of black paint and then a small dab of gold paint mixed with IA makes for a slightly curdled paint mix that creates a great wood grain effect.

 

And now… my head cast:

Plaster mother with some of my home made playdough smooshed in. I pressed a thin layer then pressed my face in then added more on my face then pressed in. It’s not perfect but it has my proportions and may be a bit more true than my previous cast.

Resined! OMG!!! Chopped strand filler is a game changer! I mix a slurry of resin with pigments and a little cabosil, then while it is starting to slump use glass tissue to hold it up. Paint a more liquid slurry on the back then throw (literally, like dusting a bread board) the chopped strand in side and press and move any excess further up. Then paint another layer and do the same. There is a lot of excess strand in the mold that can be brushed out when cured.

Also I found my pink suede boots and realised the heel is a bit chunky but super sturdy so will be a good base for the boots at the end of the film 🙂

So yes, tabbard to action suit to winged form is happening. Funnily enough it may take up less room than the current gown…

June 26, 2014  

2 Responses to “Maleficent progress :)”

  1. Meilin / 26 Jun 2014 7:18pm #For the epoxy + microballoons, did you mix that up so that it’s putty consistency or is there some store-bought mix that you use? Also, do you use gloves and get a reaction anyway or do you forgo the gloves to get better artistic control? I don’t have an allergy to epoxy (knock on wood) but I hear you can get sensitized to it…

    In any case, the staff and horns look great!

    Reply

    • admin / 2 Jul 2014 6:51am #Thank you 🙂

      I do wear gloves and the more dense kind of coveralls as well as a mask. I should get a full reperator but I need dust and chemical filters and I think you can only get one or the other. Pretty sure a solvent filter will also filter these larger particles though…

      I mix the resin then stand added filler by equal parts. I think it wind up 4:1 powder to resin. And it is then hand (in glove!) mixed to a dry dough (think scone dough) before being applied. I thin dip my (gloved!) hand in water and use that to smooth and push the surface to shape.

      I have longer fingers but small hands so I usually wind up with my hand breaking through gloves. SO I may just have to start wearing to sets at a time or hunting out the more durable sort. Once my hands break through I try to work as fast as I can.
      My current ptoblem is in part beacuse I need the three main kinds of antihistamines and I only have Loratadine on hand. Also I got some resin on my forearms when I took my coveralls off. I thought I had cleaned it off but actually not. Releasing my Shae helmet cause some fibreglass rash and so I got the stuff under my skin and poof! ALong with the synacthen test I am really riding the crest of a fairly full on allergy! Luckily skin only. A bit of coughing but that could be dust.

      Thank you for your questions 🙂 It’s always lovely to know people are reading and also thinking about it 🙂

      Reply

Leave a Comment

Filed under Uncategorized

Leave a Reply