Elsa painting!! ZOMGZOMGZOMG!!!

I get chased by a bee at nearly 2mins. Just saying if you want to hear me get very squealy, that’s your cue.

 

 

I have to share I don’t care if anyone uses these techniques and “pips” me to the post, this is too too too fun! And I’ll be using this on the cape and shoes. Read on for more info 🙂

So Resolene is the most amazing awesome finisher ever. The fact that it will bind to leather even under a wax polish? That makes it a bit special. But I wasn’t sure if it would work on sequins as they are plastic with a plastic coating. Leather is porous. Sequins are not.

Materials:

Pearl Ex (interference green and duo tone blue/green)

Resolene, matte.

Technique:

You just mix the pigments straight in to the Resolene and that is it.

 

Okay, you’ll want to work out what the best mix ratio is.

Resolene is very runny- it’s like skim milk/no fat milk in colour and viscositys. It also isn’t sticky until it starts to dry. It does however smell of ammonia so you will need to work in a ventilated area. But this is true of spray paint 😉 And if you have used acrylic paint from a tube it’s pretty much that… but more so. Not sure why some acrylics smell like ammonia and others don’t. Liquiset and PA don’t after all.

I patted the brush on the sequins after sweeping-brushing caused more pigment to build up under the sequins (which acted as mini scrapers). So I think airbrushing will be the best option. I need a new brush and a compressor. I have two cans of air but they may or may not last so will be set aside for make up.

I wouldn’t recommend a sponge as the Resolene will be sucked in to that too much as it is so liquid.

 

So for her shoes I’ll use my left over Russet (vege tanned, unfinished leather for craftwork) and dye them.. hmmm.. possibly a mix of the black and yellow dyes I have. But Feibing also does a white acrylic “dye” (it’s opaque but should work well) so I’ll go over with that as well.

And then use the Resolene/Pearl Ex mix over that with a brush to shade.

 

For her cape I’ll airbrush with stencils as well as use heat set crystals to make the designs pop. I may be airbrushing first and then deciding how many crystals I’ll need. But I won’t be setting them butting each other rather with regular spaces between.

 

So I’m back to photoshop to make the dozen special snowflakes and layout. Kinda liking working with paths again but it was frustrating trying to get my cape pattern to properly scale. I tweaked it a bit.

Leave a Comment

Filed under Uncategorized

Leave a Reply